Chapter 4. Targeted Policy
Targeted policy is the default SELinux policy used in Fedora 10. When using targeted policy, processes that are targeted run in a confined domain, and processes that are not targeted run in an unconfined domain. For example, by default, logged in users run in the unconfined_t domain, and system processes started by init run in the initrc_t domain - both of these domains are unconfined.
Unconfined domains (as well as confined domains) are subject to executable and writeable memory checks. By default, subjects running in an unconfined domain can not allocate writeable memory and execute it. This reduces vulnerability to
buffer overflow attacks. These memory checks are disable by setting Booleans, which allow the SELinux policy to be modified at runtime. Boolean configuration is discussed later.
Almost every service that listens on a network is confined in Fedora 10. Also, most processes that run as the Linux root user and perform tasks for users, such as the passwd application, are confined. When a process is confined, it runs in its own domain, such as the httpd process running in the httpd_t domain. If a confined process is compromised by an attacker, depending on SELinux policy configuration, an attacker's access to resources and the possible damage they can do is limited.
The following example demonstrates how SELinux prevents the Apache HTTP Server (httpd) from reading files that are not correctly labeled, such as files intended for use by Samba. This is an example, and should not be used in production. It assumes that the httpd, wget, setroubleshoot-server, and audit packages are installed, that the SELinux targeted policy is used, and that SELinux is running in enforcing mode:
Run the sestatus command to confirm that SELinux is enabled, is running in enforcing mode, and that targeted policy is being used:
$ /usr/sbin/sestatus
SELinux status: enabled
SELinuxfs mount: /selinux
Current mode: enforcing
Mode from config file: enforcing
Policy version: 23
Policy from config file: targeted
SELinux status: enabled is returned when SELinux is enabled. Current mode: enforcing is returned when SELinux is running in enforcing mode. Policy from config file: targeted is returned when the SELinux targeted policy is used.
As the Linux root user, run the touch /var/www/html/testfile command to create a file.
Run the ls -Z /var/www/html/testfile command to view the SELinux context:
-rw-r--r-- root root unconfined_u:object_r:httpd_sys_content_t:s0 /var/www/html/testfile
By default, Linux users run unconfined in Fedora 10, which is why the
testfile file is labeled with the SELinux
unconfined_u user. RBAC is used for processes, not files. Roles do not have a meaning for files - the
object_r role is a generic role used for files (on persistent storage and network file systems). Under the
/proc/ directory, files related to processes may use the
system_r role.
[6] The
httpd_sys_content_t type allows the
httpd process to access this file.
As the Linux root user, run the service httpd start command to start the httpd process. The output is as follows if httpd starts successfully:
# /sbin/service httpd start
Starting httpd: [ OK ]
Change into a directory where your Linux user has write access to, and run the wget http://localhost/testfile command. Unless there are changes to the default configuration, this command succeeds:
--2008-09-06 23:00:01-- http://localhost/testfile
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 200 OK
Length: 0 [text/plain]
Saving to: `testfile'
[ <=> ] 0 --.-K/s in 0s
2008-09-06 23:00:01 (0.00 B/s) - `testfile' saved [0/0]
The chcon command relabels files; however, such label changes do not survive when the file system is relabeled. For permanent changes that survive a file system relabel, use the semanage command, which is discussed later. As the Linux root user, run the following command to change the type to a type used by Samba:
chcon -t samba_share_t /var/www/html/testfile
Run the ls -Z /var/www/html/testfile command to view the changes:
-rw-r--r-- root root unconfined_u:object_r:samba_share_t:s0 /var/www/html/testfile
Note: the current DAC permissions allow the httpd process access to testfile. Change into a directory where your Linux user has write access to, and run the wget http://localhost/testfile command. Unless there are changes to the default configuration, this command fails:
--2008-09-06 23:00:54-- http://localhost/testfile
Resolving localhost... 127.0.0.1
Connecting to localhost|127.0.0.1|:80... connected.
HTTP request sent, awaiting response... 403 Forbidden
2008-09-06 23:00:54 ERROR 403: Forbidden.
As the Linux root user, run the rm -i /var/www/html/testfile command to remove testfile.
If you do not require httpd to be running, as the Linux root user, run the service httpd stop command to stop httpd:
# /sbin/service httpd stop
Stopping httpd: [ OK ]
This example demonstrates the additional security added by SELinux. Although DAC rules allowed the httpd process access to testfile in step 7, because the file was labeled with a type that the httpd process does not have access to, SELinux denied access. After step 7, an error similar to the following is logged to /var/log/messages:
Sep 6 23:00:54 localhost setroubleshoot: SELinux is preventing httpd (httpd_t) "getattr"
to /var/www/html/testfile (samba_share_t). For complete SELinux messages.
run sealert -l c05911d3-e680-4e42-8e36-fe2ab9f8e654
Previous log files may use a /var/log/messages.YYYYMMDD format. When running syslog-ng, previous log files may use a /var/log/messages.X format. If the setroubleshootd and auditd processes are running, errors similar to the following are logged to /var/log/audit/audit.log:
type=AVC msg=audit(1220706212.937:70): avc: denied { getattr } for pid=1904 comm="httpd" path="/var/www/html/testfile" dev=sda5 ino=247576 scontext=unconfined_u:system_r:httpd_t:s0 tcontext=unconfined_u:object_r:samba_share_t:s0 tclass=file
type=SYSCALL msg=audit(1220706212.937:70): arch=40000003 syscall=196 success=no exit=-13 a0=b9e21da0 a1=bf9581dc a2=555ff4 a3=2008171 items=0 ppid=1902 pid=1904 auid=500 uid=48 gid=48 euid=48 suid=48 fsuid=48 egid=48 sgid=48 fsgid=48 tty=(none) ses=1 comm="httpd" exe="/usr/sbin/httpd" subj=unconfined_u:system_r:httpd_t:s0 key=(null)
Also, an error similar to the following is logged to /var/log/httpd/error_log:
[Sat Sep 06 23:00:54 2008] [error] [client 127.0.0.1] (13)Permission denied: access to /testfile denied
Note
In Fedora 10, the
setroubleshoot-server and
audit packages are installed by default. These packages include the
setroubleshootd and
auditd daemons respectively. These daemons run by default. Stopping either of these daemons changes where SELinux denials are written to. Refer to
Section 5.2, “Which Log File is Used” for further information.
