include("site.inc"); $template = new Page; $template->initCommon(); $template->displayHeader(); ?>
![]()  | 
Senaste utgåvenoteringarna på webben | 
|---|---|
| 
 These release notes may be updated. To view the latest release notes for Fedora, visit:  | 
This section contains information related to the X Window System implementation, X.Org, provided with Fedora.
Fedora 9 features a number of changes designed to make X faster in starting and shutting down and to make other improvements. Full details of the project can be found through this feature page:
      The X.Org 1.4.99 X server has been modified to automatically
      detect and configure most hardware, eliminating the need to modify
      the /etc/X11/xorg.conf configuration file.
      The only hardware configured by default in the
      xorg.conf configuration file written by
      Anaconda is:
    
the graphics driver, and
the keyboard map
All other hardware, such as monitors (both LCD and CRT), USB mice, and touchpads, should be detected and configured automatically.
The X server queries the attached monitor for supported resolution ranges, and attempts to pick the highest resolution available with the correct aspect ratio for the display. Set the preferred resolution in → → , and the default resolution for the system in → → .
      If the /etc/X11/xorg.conf configuration file
      is not present, X automatically detects the appropriate driver,
      and assumes a 105-key US keyboard layout.
    
Fedora 9 contains two drivers for Intel Integrated Graphics Controllers:
          The default i810 driver, which contains
          support for Intel graphic chipsets up to and including i945
          and i965.
        
          The experimental intel driver, which contains
          support for Intel graphic chipsets up to and including i945.
        
      The i810 driver is limited to resolutions
      available in the BIOS. For support for non-standard resolutions,
      such as those used in certain widescreen displays, use the
      intel driver. Switch drivers by running the
      system-config-display command, which is also
      available in the menu under
       →  → .
    
      We welcome feedback on the experimental intel
      driver. Please report success in
      Bugzilla,
      attaching the full output of the lspci -vn
      command for your machine. Given success reports, various chipsets
      may be switched to use the intel driver by
      default.
    
Refer to the Xorg third-party drivers page for detailed guidelines on using third-party video drivers.