The text of and illustrations in this document are licensed by Red Hat under a Creative Commons Attribution–Share Alike 3.0 Unported license ("CC-BY-SA"). An explanation of CC-BY-SA is available at http://creativecommons.org/licenses/by-sa/3.0/. The original authors of this document, and Red Hat, designate the Fedora Project as the "Attribution Party" for purposes of CC-BY-SA. In accordance with CC-BY-SA, if you distribute this document or an adaptation of it, you must provide the URL for the original version.
Red Hat, as the licensor of this document, waives the right to enforce, and agrees not to assert, Section 4d of CC-BY-SA to the fullest extent permitted by applicable law.
Red Hat, Red Hat Enterprise Linux, the Shadowman logo, JBoss, MetaMatrix, Fedora, the Infinity Logo, and RHCE are trademarks of Red Hat, Inc., registered in the United States and other countries.
The Fedora Project distributes Fedora in the form of ISO image files that you can download from the Internet. You can transfer, or burn, these ISO image files to a blank CD or DVD and then use this disc to install Fedora on a computer.
This document shows you how to download these image files and burn them to a disc using a few common tools. This document assumes that you have no experience with Linux.
Third-party software
The Fedora Project only supports software that is part of the Fedora distribution
Other software mentioned in this article is intended to guide you in the right direction. The Fedora Project is not responsible for nor endorses those software packages, and their use is described here merely for your convenience. This is not intended to be a comprehensive guide to burning ISOs under every operating system.
2. Downloading
The ISO files are large, so it might take a long time to download them, especially using a dial-up modem. If you have a slow connection to the Internet, consider using a download manager. Download managers typically enable you to pause and recommence the download at convenient times and to resume a download that was interrupted.
2.1. Choosing CD or DVD
Fedora is distributed on multiple CD-sized ISO image files, or a single DVD-sized ISO image file. You can use the single DVD ISO file if your computer meets the following requirements:
It has a DVD-writable or DVD-rewritable drive.
It has sufficient storage space available to hold the image file (approximately 3.5 GB).
It uses a file system that can store files larger than 2 GB.
To write the DVD ISO file to a disc, your computer needs to have a drive that can write to DVD media. If your computer has a drive that only writes CD media and not DVD media, download the CD-sized files instead.
A file system is a method that your computer uses to organize the files and data on its storage devices. Some file systems cannot store files larger than 2 GB, which would prevent them from storing the Fedora DVD image, which is approximately 3.5 GB. FAT32 is a file system that is still in common use on older computers and which is limited in this way. FAT32 was the default file system for computers that used the Windows 98 and Windows Me operating systems, and was also used on many computers with the Windows 2000 and Windows XP operating systems, although it was not the default choice.
If your computer uses Windows 98 or Windows Me, do not download the DVD image file; download the CD image files instead. If your computer uses Windows 2000 or Windows XP, you can check the format of a drive such as C:. Click the Start button and double-click My Computer. Right-click the drive you want to check, and choose Properties. The resulting dialog displays the format for that file system. Most drives on computers that use Windows 2000 or Windows XP are formatted as NTFS, a file system that can handle large files like DVD images.
Create a new directory where you can download the files that you need. You need approximately 700 MB of free space available for each CD-sized ISO file, or approximately 3.5 GB for the DVD-sized ISO file.
2.2. Choosing the ISO Files
The exact files you need from the download server depend upon your system and the version of Fedora you are downloading. The files you need are named in the form of Fedora-<version>-<arch>-disc<count>.iso, where "<version>" is the version of Fedora you wish to download, "<arch>" is your computer's processor architecture, and "<count>" is the disc number for each of the installation CDs. In the case of an installation DVD, DVD is used in the filename.
The computer processor architecture is usually i386 for 32-bit PCs, including the Pentium and Athlon processor families. The architecture is usually x86_64 for 64-bit PCs, including the Athlon 64 processor family. The architecture is usually ppc for PowerPC computers, including most of Apple's Macintosh offerings before they began using Intel chips in the MacBook. If in doubt, your system probably requires the i386 versions.
For example, if downloading Fedora 12 for a Pentium 4 computer, the correct file is Fedora-i386-DVD.iso. You may also need the CHECKSUM file to verify that the files you have downloaded are complete and correct.
Note that a Fedora Live CD is also available. This disc does not contain all the software packages available on the DVD or set of CDs, but does allow you to try Fedora before you install it to your computer. Refer to the article Fedora Live Images available from http://docs.fedoraproject.org to learn more.
3. Validating the Files
Errors can occur during the download, even if your download manager reports none. Therefore it is very important to check that the files have not been corrupted in any way. This is the purpose of the CHECKSUM file. It contains one line for each of the available ISO files with a content verification code called a hash computed from the original ISO files.
BitTorrent Automatic Error Checking
BitTorrent automatically performs this error checking during downloads. If your BitTorrent application reports all files have been successfully downloaded, you can safely skip this step.
Third-party software
The Fedora Project and Red Hat, Inc. have no control over external sites such as the ones listed in the sections below, or the programs they provide.
3.1. Validating in the Windows Graphical Environment
There are a number of no-cost products available for file validation and hashing that have point and click interfaces. Here are links to a few of them:
Follow the instructions provided to install the program. When you run the program, use the file selection tools provided to select your downloaded ISO image files. Then select the SHA256 algorithm for calculation, and run the tool. The program takes some time to complete, since it must read the entire ISO file.
Open the file CHECKSUM with a text editor, such as Notepad, to display its contents. Make sure the hash displayed by the hash tool for each of the downloaded ISO files exactly matches the corresponding hash in the CHECKSUM file.
If all of the hashes match, you can burn the ISO file to disc. If a file does not match, download it again.
The sha256sum.exe program computes and displays hashes. To use it, save sha256sum.exe to the same directory as the ISO files. Select Run... from the Start menu and then enter cmd for the name of the program to start a Command Prompt window. Then change into the download directory. Run sha256sum with each ISO file like this:
cd "C:\Documents and Settings\Owner\My Documents\My Downloads\Fedora"
sha256sum.exe Fedora-i386-DVD.iso
The program takes some time to complete, since it must read the entire ISO file.
Open the file CHECKSUM with a text editor, such as Notepad, to display its contents. Make sure the hash displayed by sha256sum.exe for each of the downloaded ISO files exactly matches the corresponding hash in the CHECKSUM file.
If all of the hashes match, you can burn the ISO file to disc. If a file does not match, download it again.
Drag each Fedora image file that you want to validate, and drop it to HashTab. Take note of the SHA256 value that HashTab displays.
Open the file CHECKSUM with a text editor, such as TextEdit, to display its contents. Make sure the hash displayed by HashTab for each of the downloaded ISO files exactly matches the corresponding hash in the CHECKSUM file.
If all of the hashes match, you can burn the ISO file to disc. If a file does not match, download it again.
3.4. Validating in Linux
Open a terminal emulator:
on the GNOME desktop, click Applications → System Tools → Terminal to open GNOME Terminal
on the KDE desktop, click Kickoff Application Launcher → Applications → System → Terminal to open Konsole
Change into the directory that holds the ISO image files, then run sha256sum, for example:
$ cd Downloads
$ sha256sum Fedora-i386-DVD.iso
Open the file CHECKSUM with a text editor, such as gedit or kwrite, to display its contents. Make sure the hash displayed by sha256sum for each of the downloaded ISO files exactly matches the corresponding hash in the CHECKSUM file.
If all of the hashes match, you can burn the ISO file to disc. If a file does not match, download it again.
4. Burning
The process of burning ISO images to disc varies according to your operating system and the software that you have available. This section provides a guide to some popular disc burning tools.
If you are burning a set of Fedora CDs, you can test that you are burning the discs correctly and that your computer can boot from these discs as soon as you have burnt the first disc in the set. Refer to Section 5, “Next steps” to learn how to start your computer from a Fedora disc. If you press Enter on the Fedora boot screen, the Fedora installer will offer you a chance to test the disc. If you discover a problem with the first disc before you burn an entire set, you could save time and discs. Note that the disc test option is available when you boot from a Fedora DVD, or CDROM#1 from a Fedora CD set, but not when you boot from a Fedora Live CD.
4.1. Burning discs under Windows operating systems
To turn an ISO image files into a CD or DVD, you need disc burning software that can handle ISO image files. Although this is true of most disc burning software, exceptions exist.
In particular, note that the CD burning feature built into Windows XP and Windows Vista cannot burn CDs from images and that earlier Windows operating systems did not have any CD burning capability installed by default. Therefore, if your computer has a Windows operating system installed on it, you need a separate piece of software for this task. Examples of popular CD burning software for Windows that you might already have on your computer include Nero Burning ROM and Roxio Creator. If you use a Windows operating system on your computer and do not have disc burning software installed (or you are not sure that the software can burn discs from image files) InfraRecorder is a suitable alternative available from http://www.infrarecorder.org/, and is free and open-source.
The steps required to burn ISO images to disks with several popular CD burning applications are listed below.
In the file manager Explorer, right click on the first Fedora ISO file.
In the context menu, select Copy image to CD.
Follow the steps given by the CD Recording Wizard pop-up.
Repeat for the remaining ISO files.
4.1.2. Using Roxio Easy Media Creator 7
Start Creator Classic.
Select Other Tasks.
Select Burn from Disc Image File.
Choose the Fedora ISO file and burn it.
4.1.3. Using Nero Burning ROM 5
Start the program.
Open the File menu.
Select Burn Image.
Choose the Fedora ISO file and burn it.
Repeat the above steps for each of the other ISO files.
4.1.4. Using Nero Express 6
Start the program.
Select Disc Image or Saved Project.
An Open dialog appears. Select the first Fedora ISO file. Click Open.
Set the writing speed for your disc recorder. The optimal setting depends on your specific hardware.
Click Next to burn.
Repeat the steps above for the other ISO files.
4.2. Burning discs under Mac OS X
Right or Control-click on the ISO file. A contextual menu appears.
Click Open With → Disk Utility.
In the Disk Utility window, click the ISO file, then click the Burn icon in the toolbar. A Burn Disc In sheet slides down from the toolbar.
Insert a blank, writable disc.
Click Burn. When burning is complete, your computer ejects the now ready-to-use disc.
4.3. Burning discs under Linux
4.3.1. Burning discs on the GNOME desktop
CD/DVD Creator is disc burning software integrated with the GNOME desktop.
Right-click on the ISO image file that you downloaded. The Write to Disc dialog box appears.
Click the Write button. CD/DVD Creator prompts you to insert a disc, then burns the image file to the disc.
4.3.2. Burning discs with K3b
K3b is the default disc burning software for the KDE desktop.
Click Kickoff Application Launcher → Applications → Multimedia → CD & DVD Burning to launch K3b.
Click Tools → Burn CD Image to burn a CD, or Tools → Burn DVD ISO Image to burn a DVD. The Burn CD Image or Burn Iso1660 Image to DVD dialog box appears.
Use the button beside the Image to burn box to browse to the ISO image file.
Insert a blank disc, then click the Start button. K3b burns the image file to the disc.
4.3.3. Burning discs with Brasero
Brasero is disc burning software included with many Linux distributions, on a variety of desktops.
Launch Brasero.
Click Burn image.
Click Click here to select and image and browse to the ISO image file you downloaded.
Insert a blank disc, then click the Burn button. Brasero burns the image file to the disc.
5. Next steps
To boot your computer from the DVD or CDs that you have just produced:
Insert the DVD or CDROM#1, then turn off your computer with the disc still in the drive.
Restart your computer. As the computer starts, watch for a message that tells you to press a certain key to choose a boot device. The key varies from computer to computer but, on many systems, the required key will be F12, F2, F1, Esc, or Delete. Press the required key and select the CD or DVD drive that contains your disc.
If your computer does not offer you a boot menu, and a Fedora boot screen does not appear shortly after the computer starts, you might need to change the computer's boot sequence in its BIOS. Refer to the documentation that came with your computer for instructions. The details of this procedure vary widely from computer to computer.
When the Fedora boot screen appears, you can proceed to install Fedora. Refer to the Fedora 12 Installation Quick Start Guide for basic instructions for most desktop and laptop computers, or the Fedora 12 Installation Guide for a full set of installation instructions. Both documents are available from http://docs.fedoraproject.org.
6. We Need Feedback!
If you find a typographical error in this manual, or if you have thought of a way to make this manual better, we would love to hear from you! Please submit a report in Bugzilla: http://bugzilla.redhat.com/bugzilla/
against the product Fedora Documentation.
When submitting a bug report, be sure to mention the manual's identifier: readme-burning-isos
If you have a suggestion for improving the documentation, try to be as specific as possible when describing it. If you have found an error, please include the section number and some of the surrounding text so we can find it easily.
A. Revision History
Revision History
Revision 12.0.0
Thu Oct 01 2009
RüdigerLandmann
Update for Fedora 12, expand instructions beyond Windows operating systems, update Validation to SHA256. Incorporates material on burning discs on Mac OS X written by Brian Forté <bforte@redhat.com>.